New Conventional Alarm Control Panel, Fire Detection Alarm System Control Panel

Hot Sale Conventional Fire Detection System With LPCB/CE ApprovedProduct introduction:* AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2&4 standard.* It is modularized design, the panel can expend from 1 zone to 32 zones easily.* It has 2 level control mode by a lock.* It has 24

Featured Products

Hot Sale Conventional Fire Detection System With LPCB/CE Approved

Product introduction:

* AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2&4 standard.

* It is modularized design, the panel can expend from 1 zone to 32 zones easily.

* It has 2 level control mode by a lock.

* It has 24VDC and 5VDC power supply output.

* It has FIRE and FAULT signal output.

* It has 2 general sounders output.

* Each zone has 1 circuit detectors input .

* Each zone can be disable by a button.

* It has RESET button to reset the panel.

* It has SILENCE button to stop BUZZER and SOUNDERS.

* It has EVACUATE button to start a manual fire alarm immediately.

* It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.

* It has an optional GSM module for fire alarm by SMS .

* It is economic, user-friendly and easy maintenance.

 

ITEM1 Zone panel2 Zone panel4-8 Zone panel4-32 Zone panel
Model No.AW-CFP2166-01AW-CFP2166-02AW-CFP2166-04-08AW-CFP2166-04-16
Power Specification           
Mains supply voltage110VAC or 240VAC   
Internal power supply27.2VDC   
Total output current limited500mA @ 240VAC 3A @ 240VAC 
Main supply monitor for faultYes   
Battery protection for low voltageYes   
Batteries (default configuration)12V2AH*2   
Detector Circuit Specification    
Number of circuit124-84-32
Line fault monitor for open circuitYes   
Line fault monitor for short circuitYes   
Line fault monitor for detector removalYes, if End of Line Monitor Unit fitted in place of End of Line Resistor   
End of Line device6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)   
Detector continuity diodesSilicon 1N4001 or Schottky type (required if End of Line Monitor Unit fitted to give Detector Removal Fault)   
Call point resistor value470 to 680 Ω, 0.225 or 0.5 watt   
Maximum number of smoke/heat detectors per zone20 (based on a total detector current of 2mA, each detector consuming 100μA).Note: if End of Line Monitor Unit is fitted, for correct operation maxmum voltage drop must not exceed 12 volts.   
Maximum number of manual call points per zoneNo limit   
Sounder Circuit Specification    
Number of general circuits2   
End of line resistor value6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)   
Line fault monitor for open circuitYes   
Line fault monitor for short circuitYes   
Outputs fused AT400mA   
Maximum number of bells @ 20mA of each Sounder output20   
Fuses    
Battery fuse1.5A F 20mm   
Sounder outputs500mA F 20mm   
Fire Output    
Output typeNC and NO relay   
Maximum current100mA   
Connection Block    
Largest acceptable conductor size2.5mm2   
Smallest acceptable conductor size0.75mm2   
Size and Weight    
Dimensions(mm)272X200X70320X231X90395X502X124362X565X124
Weight (without batteries)4kg5kg7kg8kg
Weight (with batteries)5.8kg6.8kg19.6kg12.5kg
 New Conventional Alarm Control Panel, Fire Detection Alarm System Control Panel

New Conventional Alarm Control Panel, Fire Detection Alarm System Control Panel

New Conventional Alarm Control Panel, Fire Detection Alarm System Control Panel

New Conventional Alarm Control Panel, Fire Detection Alarm System Control Panel


New Conventional Alarm Control Panel, Fire Detection Alarm System Control Panel


Company Information:


ASENWARE is the fire alarm system and fire suppression system manufacturer and whole fire safety solution provider since 2005.

Driven by a commitment to sound operations, ongoing innovation, and open collaboration, we have established a competitive fire safety products line include addressable fire alarm system, conventional fire alarm system, central monitoring emergency light system, fire telephone and emergency audio system, fire pump, fire hose and gas suppression system.

Our fire safety products ,solutions and services are used in over 100 countries.
With over 200 employees work in United Kingdom-Marketing Center, China-R&D and Supply Chain Center and Bangladesh-Manufacture
Center, ASENWARE is committed to design and manufacture the best fire safety products to reduce the risk of fire, and support theworld to be more safe and more comfortable.

New Conventional Alarm Control Panel, Fire Detection Alarm System Control PanelNew Conventional Alarm Control Panel, Fire Detection Alarm System Control Panel
New Conventional Alarm Control Panel, Fire Detection Alarm System Control PanelNew Conventional Alarm Control Panel, Fire Detection Alarm System Control Panel






Exhibition:
New Conventional Alarm Control Panel, Fire Detection Alarm System Control Panel


Certification:New Conventional Alarm Control Panel, Fire Detection Alarm System Control Panel

Our Services:

* Over 15 years' experience.
* Prompt response.
* OEM & ODM available.
* Support factory inspection.
* Standard qulity control system.
* Different choices of payment and delivery.
* Independant R&D dept, designing dept,to meet your special need.
* Whole set of technical supports and with abroad projects experience.
* We are manufacturer, offer better price better service.
* Direct control on materials, production status, quality checking.
* Sample order, customized order, bulk order are supported.
* Reliable after-sales service, with one year waranty.


Contact:
Lily Huang

Shenzhen Asenware Test&Control Technology Co.,Ltd
Website:asenware.en.made-in-china.com
Factory Add: 4F,10#, Xingye Rd., Huoju District, Zhongshan City, Guangdong
Marketing Center AddR: 26H, Building D, Shihong Garden, Fanshen Rd, Baoan, Shenzhen

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours