WD-1201M-DIN-M12(T4/V3/D)
Brief introduction
DIN Rail Industrial PLC Ethernet Bridge is a powerline telecommunication product which developed by WonderTek Technology (KunShan) Co.,LTD., it supports HomePlugAV2 protocol. At present, it has been widely used in railway, mineral, industrial communication, airport, subway, coal mine, intelligent storage, industrial automation control, automatic garage and other wired or sliding contact line and many other sites.1.1 Highlight
1.1.1 Technical parameters
l Support HomePlug/HomePlugAV2.l Industrial DIN rail style installation.
l Actual bandwidth up to 550Mbps.
l The maximum transfer distance up to 800 meters.
l Self-adapt the rate.
l One Domain Master can manage 127pcs End Point
1.1.2 Manageability
l Support Remote Firmware update(TR069).l 802.3D Ethernet Bridge.
l 802.1Q VLAN.
l Quality of Service(QoS) .
l IGMO(IPv4)Snooping&MLD(IPv6)Snooping.
1.1.3Operating environment
l Working temperature: -40ºC-85ºC.l Operating humidity: 10%-85% no condense.
l Storage humidity:5%-90% no condense.
1.1.4 Design standards
IEC 60529 IEC 50022IEC 60068-2-6 MIL-STD-810G
HomePlugAV HomePlugAV2
Specification:
Model | WD-1201M-DIN-M12(T4/V3/D) |
Interface | 1*M12 LAN 10/100/1000Base-TX 1* power interface |
LED display light | Ethernet PLC Power |
Transfer frequency | 2-68MHz |
Protocol(PHY) | IEEE802.3,IEEE802.3x, IEEE802.3u HomePlugAV2 |
Security | 128-AES |
Transfer rate(PHY) | 1200Mbps |
Number of each group | 128 |
Modulation | OFDM |
Effective transfer rate | TCP/IP 530Mbps |
Manageability | Remote Firmware update,support TR-069(optional) |
802.1D Ethernet Bridge | |
802.1Q VLAN | |
Quality of Service(QoS) | |
Operating temperature | -40ºC-80ºC |
Working voltage | T4/V3(90-520V AC) D(18-72V DC) |
Size | 120*90*45mm(L×W×H) |
Weight | 0.30kg |
Operating environment | Operating humidity:10%-85% (no condense) |
Storage humidity: 5%-90%(no condense) | |
Certification | FCC,CE class B,WEEE,RoHS |
1.2 Features
(1) Packet loss:≤0.1%(100M,load 70%).
(2) Support 7*24 hours all weather operation.
(3) Hardware watch dog function.
(4) PING≤2MS.
(5) M12 shockproof network interface.
1.3 Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge;
Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each;
Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
1.4 Immunity of electrical fast transient impulse group (Common mode)
The testing voltage which the device should be beared:
between the power supply voltage port and ground: ±2.0kV;
between signal circuit and ground: ±1.0kV;
repetition frequency: 5KHz, test duration: 1 min/ time;
testing times: Plus-n-Minus 5 times each.
According to GB/T 17626.4-2008.
1.5 Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV;
The interval of continuous impulses: 1min/time;
Test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
1.6 Anti- vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.
1.7 System Topology
Model: WD-1201M-DIN-M12(T4)
Model: WD-1201M-DIN-M12(V3)
Model: WD-1201M-DIN-M12(D)
