Complete Telemetry Solution
x-Messenger- Expandable GSM/GPRS PLC
Incorporates a wide range of CPUs, expansions, various accessories and software, specially designed for GSM/GPRS wireless systems being used for remote measurements, datalogging, control, diagnostics and object via short text messages (SMS) or CLIP calls. Configurable messages sending from device with static (text) or dynamic (text and measured values) content are a convenient way of passing important information to the monitoring center, or directly to the defined phone numbers. SMS messages sending or Call-out can be triggered by change of binary input state,reaching alarmthresholds, marker state change, counters and clocks.
In particular, x-Messenger shall possess industrial design,practical set of I/O resources& easy to use configuration software tools. Multiple optional analog signals (0..10V DC) (0…20mA) ,(PT100) inputs built-in the module , make it possible to have direct connection of sensors, which lowers the cost of building system. Hence, it can directly work with humidity sensors, water level sensor, pressure transducers,flow sensors, smoke, gas, motion, shock and noise detectors,etc.
Highlights at a glance
* Integral GSM 850/900/1800/1900 modem
* GPRS, SMS ,Email and CLIP support
* Parameters in the programchanging by means of
* SMS via cell phone
* Autonomous login into GSM/GPRS network
* Different I/O configurations available
- 2DI/1DO, 4DI/2DO, 8DI/4DO
- Analog inputs
(DC0…10V,0/4..20mA,PT100)
- Expandable up to 40DI/36DO,36AI/36DO
- Expandable up to 16 PT100 inputs
* RTC, Timers and Counters, High speed input
* Event based transmission
* Remote configuration via GPRS and user friendly
* eSmsConfig software
* Firmware upgrade via serial port
* Configurable filtration for digital inputs
* Relay (10A) and Transistor output optional
* Configurable output pulse width
* Standard Modbus RTU/ASCII/TCP communication
protocol supported
* Data logging ( SD card socket built-in/
optional accessory)
----------------------------------------------------------------------------------------------------
Model: EXM-12DC-DA-R-HMI
Integral GSM 850/900/1800/1900 modem
Supply Voltage:12 ~ 24 VDC
Inputs:4 digital/analog+4 digital
Analog Input signal: 4 DC (0..10V)
Outputs:4 relay(10A)
PWM:no
High Speed Count:(I7,I8)60kHz
Voice alarming:no
Webcam Interface:no
Ethernet:no
Data logging:optional
Interface:1 B-type USB ,1 RS232 & 1 RS485
Communication protocol:Modbus RTU&ASCII
Expansion:yes
RTC:yes
LCD display with keypad:Optional(4*16 LCD)
Alarming mode:SMS,Ring ,email
output control mode:SMS ,Call-In, Logic programme control
Installation Dimensions & Wiring Diagram